dmesg - sleep 6m
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-504.8.1.el6.x86_64 (mockbuild@sl6-kojislave01.fnal.gov) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-11) (GCC) ) #1 SMP Tue Jan 27 13:39:10 CST 2015
Command line: ro root=/dev/mapper/VolGroup-lv_root nomodeset rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=VolGroup/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000d6fa5800 (usable)
BIOS-e820: 00000000d6fa5800 - 00000000d8000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000328000000 (usable)
DMI 2.6 present.
SMBIOS version 2.6 @ 0xF9C00
DMI: Hewlett-Packard HP Z800 Workstation/0AECh, BIOS 786G5 v03.21 08/24/2011
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x328000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00D8000000 mask FFF8000000 uncachable
1 base 00E0000000 mask FFE0000000 uncachable
2 base 0328000000 mask FFF8000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xd6fa5 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000d6fa5000
0000000000 - 00d6e00000 page 2M
00d6e00000 - 00d6fa5000 page 4k
kernel direct mapping tables up to d6fa5000 @ 8000-e000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000000328000000
0100000000 - 0328000000 page 2M
kernel direct mapping tables up to 328000000 @ c000-16000
RAMDISK: 36d31000 - 37fef0d2
ACPI: RSDP 00000000000e9010 00024 (v02 HPQOEM)
ACPI: XSDT 00000000d6fb88e8 0006C (v01 HPQOEM SLIC-WKS 20110824 00000000)
ACPI: FACP 00000000d6fb8a88 000F4 (v03 HPQOEM TYLSBURG 00000001 00000000)
ACPI: DSDT 00000000d6fb9457 0A984 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
ACPI: FACS 00000000d6fb8800 00040
ACPI: APIC 00000000d6fb8b7c 00194 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: ASF! 00000000d6fb8d10 00063 (v32 HPQOEM TYLSBURG 00000001 00000000)
ACPI: MCFG 00000000d6fb8d73 0003C (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: TCPA 00000000d6fb8daf 00032 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: HPET 00000000d6fb8f57 00038 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: DMAR 00000000d6fb8f8f 001B8 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: SRAT 00000000d6fb915f 002F8 (v02 HPQOEM TYLSBURG 00000001 00000000)
ACPI: SSDT 00000000d6fc5405 01184 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 6 -> Node 0
SRAT: PXM 1 -> APIC 16 -> Node 1
SRAT: PXM 1 -> APIC 18 -> Node 1
SRAT: PXM 1 -> APIC 20 -> Node 1
SRAT: PXM 1 -> APIC 22 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 e8000-d8000000
SRAT: Node 0 PXM 0 100000000-1a8000000
SRAT: Node 1 PXM 1 1a8000000-328000000
NUMA: Allocated memnodemap from 100000 - 1ca040
NUMA: Using 15 for the hash shift.
Bootmem setup node 0 0000000000000000-00000001a8000000
NODE_DATA [0000000000015000 - 0000000000048fff]
bootmap [0000000000049000 - 000000000007dfff] pages 35
(9 early reservations) ==> bootmem [0000000000 - 01a8000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000202abe4] TEXT DATA BSS ==> [0001000000 - 000202abe4]
#3 [0036d31000 - 0037fef0d2] RAMDISK ==> [0036d31000 - 0037fef0d2]
#4 [000009cc00 - 0000100000] BIOS reserved ==> [000009cc00 - 0000100000]
#5 [000202b000 - 000202b329] BRK ==> [000202b000 - 000202b329]
#6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#7 [000000c000 - 0000015000] PGTABLE ==> [000000c000 - 0000015000]
#8 [0000100000 - 00001ca040] MEMNODEMAP ==> [0000100000 - 00001ca040]
Bootmem setup node 1 00000001a8000000-0000000328000000
NODE_DATA [00000001a8000040 - 00000001a803403f]
bootmap [00000001a8035000 - 00000001a8064fff] pages 30
(9 early reservations) ==> bootmem [01a8000000 - 0328000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 000202abe4] TEXT DATA BSS
#3 [0036d31000 - 0037fef0d2] RAMDISK
#4 [000009cc00 - 0000100000] BIOS reserved
#5 [000202b000 - 000202b329] BRK
#6 [0000008000 - 000000c000] PGTABLE
#7 [000000c000 - 0000015000] PGTABLE
#8 [0000100000 - 00001ca040] MEMNODEMAP
found SMP MP-table at [ffff8800000f9bf0] f9bf0
Reserving 129MB of memory at 48MB for crashkernel (System RAM: 12928MB)
[ffffea0005cc0000-ffffea0005dfffff] potential offnode page_structs
[ffffea0000000000-ffffea0005dfffff] PMD -> [ffff880028600000-ffff88002dbfffff] on node 0
[ffffea0005e00000-ffffea000b1fffff] PMD -> [ffff8801a8200000-ffff8801ad5fffff] on node 1
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00328000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000001 -> 0x0000009c
0: 0x00000100 -> 0x000d6fa5
0: 0x00100000 -> 0x001a8000
1: 0x001a8000 -> 0x00328000
On node 0 totalpages: 1568576
DMA zone: 56 pages used for memmap
DMA zone: 317 pages reserved
DMA zone: 3622 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 862173 pages, LIFO batch:31
Normal zone: 9408 pages used for memmap
Normal zone: 678720 pages, LIFO batch:31
On node 1 totalpages: 1572864
Normal zone: 21504 pages used for memmap
Normal zone: 1551360 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec10000, GSI 24-47
ACPI: IOAPIC (id[0x03] address[0xfec20000] gsi_base[48])
IOAPIC[2]: apic_id 3, version 32, address 0xfec20000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 32 CPUs, 24 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 000000000009c000 - 000000000009d000
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
PM: Registered nosave memory: 00000000d6fa5000 - 00000000d6fa6000
PM: Registered nosave memory: 00000000d6fa6000 - 00000000d8000000
PM: Registered nosave memory: 00000000d8000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
PM: Registered nosave memory: 00000000fed45000 - 0000000100000000
Allocating PCI resources starting at d8000000 (gap: d8000000:18000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s90968 r8192 d23720 u131072
pcpu-alloc: s90968 r8192 d23720 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 08 10 12 14 16 18 20 22 24 26 28 30
pcpu-alloc: [1] 04 05 06 07 09 11 13 15 17 19 21 23 25 27 29 31
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 3095875
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/VolGroup-lv_root nomodeset rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 crashkernel=129M@0M rd_LVM_LV=VolGroup/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
------------[ cut here ]------------
WARNING: at drivers/pci/dmar.c:588 warn_invalid_dmar+0x7a/0x90() (Not tainted)
Hardware name: HP Z800 Workstation
[Firmware Warn]: Your BIOS is broken; DMAR reported at address da100000 returns all ones!
BIOS vendor: Hewlett-Packard; Ver: 786G5 v03.21; Product Version:
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.32-504.8.1.el6.x86_64 #1
Call Trace:
[] ? warn_slowpath_common+0x87/0xc0
[] ? warn_slowpath_fmt_taint+0x3f/0x50
[] ? native_set_pte_at+0xd/0x40
[] ? native_flush_tlb_single+0x9/0x10
[] ? warn_invalid_dmar+0x7a/0x90
[] ? check_zero_address+0xd6/0x118
[] ? acpi_get_table_with_size+0x5a/0xb4
[] ? _etext+0x0/0x3
[] ? detect_intel_iommu+0x12/0x91
[] ? pci_iommu_alloc+0x5e/0x6d
[] ? mem_init+0x19/0xec
[] ? start_kernel+0x221/0x430
[] ? x86_64_start_reservations+0x125/0x129
[] ? x86_64_start_kernel+0x115/0x124
---[ end trace a7919e7f17c0a725 ]---
Disabling lock debugging due to kernel taint
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 12152268k/13238272k available (5336k kernel code, 672512k absent, 413492k reserved, 7016k data, 1292k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1480
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 50331648 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1994.930 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.86 BogoMIPS (lpj=1994930)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21918 entries in 86 pages
dmar: Host address width 40
dmar: DRHD base: 0x000000da100000 flags: 0x0
------------[ cut here ]------------
WARNING: at drivers/pci/dmar.c:588 warn_invalid_dmar+0x7a/0x90() (Tainted: G I--------------- )
Hardware name: HP Z800 Workstation
[Firmware Warn]: Your BIOS is broken; DMAR reported at address da100000 returns all ones!
BIOS vendor: Hewlett-Packard; Ver: 786G5 v03.21; Product Version:
Modules linked in:
Pid: 1, comm: swapper Tainted: G I--------------- 2.6.32-504.8.1.el6.x86_64 #1
Call Trace:
[] ? warn_slowpath_common+0x87/0xc0
[] ? warn_slowpath_fmt_taint+0x3f/0x50
[] ? __ioremap_caller+0x2a8/0x390
[] ? warn_invalid_dmar+0x7a/0x90
[] ? alloc_iommu+0x2af/0x310
[] ? dmar_table_init+0x199/0x345
[] ? enable_IR_x2apic+0x10/0x1ba
[] ? default_setup_apic_routing+0x16/0x7b
[] ? native_smp_prepare_cpus+0x370/0x397
[] ? kernel_init+0x10b/0x2f7
[] ? child_rip+0xa/0x20
[] ? kernel_init+0x0/0x2f7
[] ? child_rip+0x0/0x20
---[ end trace a7919e7f17c0a726 ]---
dmar: IOMMU: failed to map dmar0
dmar: parse DMAR table failure.
APIC routing finalized to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
CPU erratum AAJ80 worked around
CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 Ok.
Booting Node 1, Processors #4 #5 #6 #7
Brought up 8 CPUs
Total of 8 processors activated (31916.86 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2656 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG at f0000000 - f7ffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [X1PR] (on)
ACPI: Power Resource [X0PR] (on)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880325a70df8), AE_ALREADY_EXISTS
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xdb000000-0xefffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xfdffffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfed003ff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0x0fff]
pci_root PNP0A08:00: host bridge window [io 0x1000-0xdfff]
pci_root PNP0A08:00: host bridge window expanded to [io 0x0000-0x03af]; [io 0x0000-0x03af] ignored
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xdb000000-0xefffffff]
pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfdffffff]
pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff]
pci_bus 0000:00: root bus resource [io 0x1000-0xdfff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0xb000-0xb01f]
pci 0000:00:1a.1: reg 20: [io 0xb020-0xb03f]
pci 0000:00:1a.2: reg 20: [io 0xb040-0xb05f]
pci 0000:00:1a.7: reg 10: [mem 0xdc004800-0xdc004bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xdc000000-0xdc003fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xb060-0xb07f]
pci 0000:00:1d.1: reg 20: [io 0xb080-0xb09f]
pci 0000:00:1d.2: reg 20: [io 0xb0a0-0xb0bf]
pci 0000:00:1d.7: reg 10: [mem 0xdc004c00-0xdc004fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: no compatible bridge window for [io 0xf800-0xf87f]
pci 0000:00:1f.0: no compatible bridge window for [io 0xfa00-0xfa3f]
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
pci 0000:00:1f.2: reg 10: [io 0xb100-0xb107]
pci 0000:00:1f.2: reg 14: [io 0xb110-0xb113]
pci 0000:00:1f.2: reg 18: [io 0xb108-0xb10f]
pci 0000:00:1f.2: reg 1c: [io 0xb114-0xb117]
pci 0000:00:1f.2: reg 20: [io 0xb0c0-0xb0df]
pci 0000:00:1f.2: reg 24: [mem 0xdc004000-0xdc0047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:03:00.0: reg 10: [mem 0xfd000000-0xfd000fff 64bit pref]
pci 0000:03:00.0: reg 18: [mem 0xfb000000-0xfbffffff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xfc000000-0xfcffffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 03-03]
pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfd0fffff 64bit pref]
pci 0000:0f:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:0f:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:0f:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:0f:00.0: reg 24: [io 0xc000-0xc07f]
pci 0000:0f:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 0f-0f]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfaffffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:28:00.0: reg 10: [mem 0xdf000000-0xdf01ffff]
pci 0000:28:00.0: reg 14: [mem 0xdf020000-0xdf03ffff]
pci 0000:28:00.0: reg 18: [io 0xd000-0xd01f]
pci 0000:28:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:28:00.0: PME# supported from D0 D3hot D3cold
pci 0000:28:00.0: PME# disabled
pci 0000:28:00.1: reg 10: [mem 0xdf040000-0xdf05ffff]
pci 0000:28:00.1: reg 14: [mem 0xdf060000-0xdf07ffff]
pci 0000:28:00.1: reg 18: [io 0xd020-0xd03f]
pci 0000:28:00.1: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:28:00.1: PME# supported from D0 D3hot D3cold
pci 0000:28:00.1: PME# disabled
pci 0000:00:07.0: PCI bridge to [bus 28-28]
pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:07.0: bridge window [mem 0xdf000000-0xdf0fffff]
pci 0000:00:1c.0: PCI bridge to [bus 1c-1c]
pci 0000:02:00.0: reg 10: [mem 0xdd000000-0xdd00ffff 64bit]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 02-02]
pci 0000:00:1c.4: bridge window [mem 0xdd000000-0xdd0fffff]
pci 0000:01:00.0: reg 10: [mem 0xde000000-0xde00ffff 64bit]
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 01-01]
pci 0000:00:1c.5: bridge window [mem 0xde000000-0xde0fffff]
pci 0000:37:09.0: reg 10: [mem 0xdb000000-0xdb000fff]
pci 0000:37:09.0: supports D1 D2
pci 0000:37:09.0: PME# supported from D0 D1 D2 D3hot
pci 0000:37:09.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 37-37] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xdb000000-0xdb0fffff]
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xdb000000-0xefffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfdffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed003ff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0xdfff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IOH1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IOH3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IOH7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880325a70df8), AE_ALREADY_EXISTS
pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880325a70df8), AE_ALREADY_EXISTS
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 40-7b])
pci_root PNP0A08:01: host bridge window [mem 0xda000000-0xdaffffff]
pci_root PNP0A08:01: host bridge window [io 0xe000-0xefff]
PCI host bridge to bus 0000:40
pci_bus 0000:40: root bus resource [mem 0xda000000-0xdaffffff]
pci_bus 0000:40: root bus resource [io 0xe000-0xefff]
pci 0000:40:03.0: PME# supported from D0 D3hot D3cold
pci 0000:40:03.0: PME# disabled
pci 0000:40:07.0: PME# supported from D0 D3hot D3cold
pci 0000:40:07.0: PME# disabled
pci 0000:40:09.0: PME# supported from D0 D3hot D3cold
pci 0000:40:09.0: PME# disabled
pci 0000:40:03.0: PCI bridge to [bus 42-42]
pci 0000:40:07.0: PCI bridge to [bus 60-60]
pci 0000:41:00.0: reg 10: [io 0xe000-0xe0ff]
pci 0000:41:00.0: reg 14: [mem 0xda010000-0xda013fff 64bit]
pci 0000:41:00.0: reg 1c: [mem 0xda000000-0xda00ffff 64bit]
pci 0000:41:00.0: reg 30: [mem 0x00000000-0x001fffff pref]
pci 0000:41:00.0: supports D1 D2
pci 0000:40:09.0: PCI bridge to [bus 41-41]
pci 0000:40:09.0: bridge window [io 0xe000-0xefff]
pci 0000:40:09.0: bridge window [mem 0xda000000-0xda0fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IOH3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IOH7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IOH9._PRT]
pci0000:40: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Root Bridge [NHL1] (domain 0000 [bus 7f])
PCI host bridge to bus 0000:7f
pci0000:7f: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 14 15)
vgaarb: device added: PCI:0000:0f:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0f:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x00f0-0x00ff]
pnp 00:01: [irq 13]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0080-0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [irq 12]
pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: [irq 4]
pnp 00:07: [io 0x03f8-0x03ff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:08: [irq 6]
pnp 00:08: [dma 2]
pnp 00:08: [io 0x03f0-0x03f5]
pnp 00:08: [io 0x03f7]
pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:0a: [mem 0xfed00000-0xfed003ff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0b: [io 0x0010-0x001f]
pnp 00:0b: [io 0x0050-0x0053]
pnp 00:0b: [io 0x0072-0x0077]
pnp 00:0b: [io 0x0090-0x009f]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [io 0x0400-0x041f]
pnp 00:0c: [io 0x0420-0x043f]
pnp 00:0c: [io 0x0440-0x045f]
pnp 00:0c: [io 0x0460-0x047f]
pnp 00:0c: [io 0x0480-0x048f]
pnp 00:0c: [io 0xf800-0xf81f]
pnp 00:0c: [io 0xf820-0xf83f]
pnp 00:0c: [io 0xf840-0xf85f]
pnp 00:0c: [io 0xf860-0xf87f]
pnp 00:0c: [io 0xfa00-0xfa3f]
pnp 00:0c: [io 0xfc00-0xfc7f]
pnp 00:0c: [io 0xfc80-0xfcff]
pnp 00:0c: [io 0xfe00-0xfe7f]
pnp 00:0c: [io 0xfe80-0xfeff]
pnp 00:0c: disabling [io 0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:0c: disabling [io 0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:0c: disabling [io 0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:0c: disabling [io 0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [io 0x004e-0x004f]
pnp 00:0d: [io 0x04d0-0x04d1]
pnp 00:0d: [io 0x4700-0x470b]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [io 0x0cf8-0x0cff]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:0f: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:10: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:11: [mem 0x00000000-0x0009ffff]
pnp 00:11: [mem 0x00100000-0xd7ffffff]
pnp 00:11: [mem 0x000e8000-0x000fffff]
pnp 00:11: [mem 0xfec01000-0xfecfffff]
pnp 00:11: [mem 0xfed00000-0xfed3ffff]
pnp 00:11: [mem 0xfed40000-0xffffffff]
pnp 00:11: [mem 0xf0000000-0xf7ffffff]
pnp 00:11: [mem 0x000d6800-0x000e7fff]
pnp 00:11: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:41:00.0 BAR 6 [mem 0x00000000-0x001fffff pref]
pnp 00:11: disabling [mem 0x00100000-0xd7ffffff] because it overlaps 0000:41:00.0 BAR 6 [mem 0x00000000-0x001fffff pref]
pnp 00:11: disabling [mem 0x000e8000-0x000fffff] because it overlaps 0000:41:00.0 BAR 6 [mem 0x00000000-0x001fffff pref]
pnp 00:11: disabling [mem 0x000d6800-0x000e7fff] because it overlaps 0000:41:00.0 BAR 6 [mem 0x00000000-0x001fffff pref]
pnp 00:11: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 18 devices
ACPI: ACPI bus type pnp unregistered
system 00:0c: [io 0x0400-0x041f] has been reserved
system 00:0c: [io 0x0420-0x043f] has been reserved
system 00:0c: [io 0x0440-0x045f] has been reserved
system 00:0c: [io 0x0460-0x047f] has been reserved
system 00:0c: [io 0x0480-0x048f] has been reserved
system 00:0c: [io 0xfa00-0xfa3f] has been reserved
system 00:0c: [io 0xfc00-0xfc7f] has been reserved
system 00:0c: [io 0xfc80-0xfcff] has been reserved
system 00:0c: [io 0xfe00-0xfe7f] has been reserved
system 00:0c: [io 0xfe80-0xfeff] has been reserved
system 00:0d: [io 0x04d0-0x04d1] has been reserved
system 00:0d: [io 0x4700-0x470b] has been reserved
system 00:11: [mem 0xfec01000-0xfecfffff] could not be reserved
system 00:11: [mem 0xfed00000-0xfed3ffff] could not be reserved
system 00:11: [mem 0xfed40000-0xffffffff] could not be reserved
system 00:11: [mem 0xf0000000-0xf7ffffff] has been reserved
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 1c-1c] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 1c-1c] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 1c-1c] add_size 200000
pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 01-01] add_size 1000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-01] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0xf800-0xf87f] has bogus alignment
pci 0000:00:1f.0: BAR 14: [io 0xfa00-0xfa3f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:07.0: BAR 15: assigned [mem 0xdb100000-0xdb1fffff pref]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xdb200000-0xdb3fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xdb400000-0xdb5fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xdb600000-0xdb7fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xdb800000-0xdb9fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.5: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:01.0: PCI bridge to [bus 03-03]
pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfd0fffff 64bit pref]
pci 0000:0f:00.0: BAR 6: can't assign mem pref (size 0x80000)
pci 0000:00:03.0: PCI bridge to [bus 0f-0f]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfaffffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:28:00.0: BAR 6: assigned [mem 0xdb100000-0xdb11ffff pref]
pci 0000:28:00.1: BAR 6: assigned [mem 0xdb120000-0xdb13ffff pref]
pci 0000:00:07.0: PCI bridge to [bus 28-28]
pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:07.0: bridge window [mem 0xdf000000-0xdf0fffff]
pci 0000:00:07.0: bridge window [mem 0xdb100000-0xdb1fffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 1c-1c]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xdb200000-0xdb3fffff]
pci 0000:00:1c.0: bridge window [mem 0xdb400000-0xdb5fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 02-02]
pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.4: bridge window [mem 0xdd000000-0xdd0fffff]
pci 0000:00:1c.4: bridge window [mem 0xdb600000-0xdb7fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 01-01]
pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.5: bridge window [mem 0xde000000-0xde0fffff]
pci 0000:00:1c.5: bridge window [mem 0xdb800000-0xdb9fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 37-37]
pci 0000:00:1e.0: bridge window [mem 0xdb000000-0xdb0fffff]
pci 0000:40:09.0: BAR 15: assigned [mem 0xda200000-0xda3fffff pref]
pci 0000:40:03.0: PCI bridge to [bus 42-42]
pci 0000:40:07.0: PCI bridge to [bus 60-60]
pci 0000:41:00.0: BAR 6: assigned [mem 0xda200000-0xda3fffff pref]
pci 0000:40:09.0: PCI bridge to [bus 41-41]
pci 0000:40:09.0: bridge window [io 0xe000-0xefff]
pci 0000:40:09.0: bridge window [mem 0xda000000-0xda0fffff]
pci 0000:40:09.0: bridge window [mem 0xda200000-0xda3fffff pref]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.5: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: power state changed by ACPI to D0
pci 0000:00:1e.0: power state changed by ACPI to D0
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:40:03.0: setting latency timer to 64
pci 0000:40:07.0: setting latency timer to 64
pci 0000:40:09.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 5 [mem 0xdb000000-0xefffffff]
pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfdffffff]
pci_bus 0000:00: resource 7 [mem 0xfed00000-0xfed003ff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 9 [io 0x0000-0x03af]
pci_bus 0000:00: resource 10 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 11 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 12 [io 0x0d00-0x0fff]
pci_bus 0000:00: resource 13 [io 0x1000-0xdfff]
pci_bus 0000:03: resource 2 [mem 0xfb000000-0xfd0fffff 64bit pref]
pci_bus 0000:0f: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:0f: resource 1 [mem 0xf8000000-0xfaffffff]
pci_bus 0000:0f: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:28: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:28: resource 1 [mem 0xdf000000-0xdf0fffff]
pci_bus 0000:28: resource 2 [mem 0xdb100000-0xdb1fffff pref]
pci_bus 0000:1c: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:1c: resource 1 [mem 0xdb200000-0xdb3fffff]
pci_bus 0000:1c: resource 2 [mem 0xdb400000-0xdb5fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xdd000000-0xdd0fffff]
pci_bus 0000:02: resource 2 [mem 0xdb600000-0xdb7fffff 64bit pref]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xde0fffff]
pci_bus 0000:01: resource 2 [mem 0xdb800000-0xdb9fffff 64bit pref]
pci_bus 0000:37: resource 1 [mem 0xdb000000-0xdb0fffff]
pci_bus 0000:37: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:37: resource 5 [mem 0xdb000000-0xefffffff]
pci_bus 0000:37: resource 6 [mem 0xf8000000-0xfdffffff]
pci_bus 0000:37: resource 7 [mem 0xfed00000-0xfed003ff]
pci_bus 0000:37: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:37: resource 9 [io 0x0000-0x03af]
pci_bus 0000:37: resource 10 [io 0x03b0-0x03df]
pci_bus 0000:37: resource 11 [io 0x03e0-0x0cf7]
pci_bus 0000:37: resource 12 [io 0x0d00-0x0fff]
pci_bus 0000:37: resource 13 [io 0x1000-0xdfff]
pci_bus 0000:40: resource 4 [mem 0xda000000-0xdaffffff]
pci_bus 0000:40: resource 5 [io 0xe000-0xefff]
pci_bus 0000:41: resource 0 [io 0xe000-0xefff]
pci_bus 0000:41: resource 1 [mem 0xda000000-0xda0fffff]
pci_bus 0000:41: resource 2 [mem 0xda200000-0xda3fffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1a.1: PCI INT B disabled
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1a.2: PCI INT C disabled
pci 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1a.7: PCI INT C disabled
pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:0f:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19192k freed
futex hash table entries: 8192 (order: 7, 524288 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1427157122.655:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 23772
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key ACD54EC85D341B50
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
- Added public key CB445E0DA3EA1F65
- User ID: Red Hat Enterprise Linux Driver Update Program (key 4)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 72 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 72 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 73 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 73 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 74 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.5: irq 74 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xdc004800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-504.8.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdc004c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-504.8.1.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x0000b000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-504.8.1.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b020
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-504.8.1.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000b040
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-504.8.1.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000b060
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-504.8.1.el6.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000b080
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-504.8.1.el6.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000b0a0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32-504.8.1.el6.x86_64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2015-03-24 00:32:03 UTC (1427157123)
Initalizing network drop monitor service
Freeing unused kernel memory: 1292k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 788k freed
Freeing unused kernel memory: 1568k freed
dracut: dracut-004-356.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ACPI: WMI: Mapper loaded
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
firewire_ohci 0000:37:09.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
firewire_ohci: Added fw-ohci device 0000:37:09.0, OHCI version 1.0
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
alloc irq_desc for 75 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 75 for MSI/MSI-X
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pmp pio slum part ccc sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdc004000 port 0xdc004100 irq 75
ata2: SATA max UDMA/133 abar m2048@0xdc004000 port 0xdc004180 irq 75
ata3: SATA max UDMA/133 abar m2048@0xdc004000 port 0xdc004200 irq 75
ata4: SATA max UDMA/133 abar m2048@0xdc004000 port 0xdc004280 irq 75
ata5: SATA max UDMA/133 abar m2048@0xdc004000 port 0xdc004300 irq 75
ata6: SATA max UDMA/133 abar m2048@0xdc004000 port 0xdc004380 irq 75
usb 8-1: new low speed USB device number 2 using uhci_hcd
Refined TSC clocksource calibration: 1994.999 MHz.
Switching to clocksource tsc
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 8-1: New USB device found, idVendor=03f0, idProduct=034a
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: HP Elite USB Keyboard
usb 8-1: Manufacturer: Chicony
usb 8-1: configuration #1 chosen from 1 choice
input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3
generic-usb 0003:03F0:034A.0001: input,hidraw0: USB HID v1.10 Keyboard [Chicony HP Elite USB Keyboard] on usb-0000:00:1d.2-1/input0
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: hp DVD A DH16ABSH, YHD9, max UDMA/100, ATAPI AN
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM hp DVD A DH16ABSH YHD9 PQ: 0 ANSI: 5
firewire_core: created device fw0: GUID 0060b000002646c7, S400
input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input4
generic-usb 0003:03F0:034A.0002: input,hidraw1: USB HID v1.10 Device [Chicony HP Elite USB Keyboard] on usb-0000:00:1d.2-1/input1
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SAS Host driver 3.04.20
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
mptsas 0000:41:00.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
mptbase: ioc0: Initiating bringup
usb 8-2: new low speed USB device number 3 using uhci_hcd
ioc0: LSISAS1068E B3: Capabilities={Initiator}
mptsas 0000:41:00.0: setting latency timer to 64
usb 8-2: New USB device found, idVendor=04f2, idProduct=0718
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: Chicony wired mouse
usb 8-2: Manufacturer: Chicony
usb 8-2: configuration #1 chosen from 1 choice
input: Chicony Chicony wired mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input5
generic-usb 0003:04F2:0718.0003: input,hidraw2: USB HID v1.11 Mouse [Chicony Chicony wired mouse] on usb-0000:00:1d.2-2/input0
scsi6 : ioc0: LSISAS1068E B3, FwRev=01190300h, Ports=1, MaxQ=266, IRQ=56
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x5000c50028a8785d
scsi 6:0:0:0: Direct-Access SEAGATE ST3300657SS HPS1 PQ: 0 ANSI: 5
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x5000c5003c30049d
scsi 6:0:1:0: Direct-Access SEAGATE ST3300657SS HPS1 PQ: 0 ANSI: 5
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 2, phy 2, sas_addr 0x5000c50028a8ddc1
scsi 6:0:2:0: Direct-Access SEAGATE ST3300657SS HPS1 PQ: 0 ANSI: 5
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 3, phy 3, sas_addr 0x5000c5003c4a83a1
scsi 6:0:3:0: Direct-Access SEAGATE ST3300657SS HPS1 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
STARTING CRC_T10DIF
sd 6:0:0:0: [sda] 585937500 512-byte logical blocks: (300 GB/279 GiB)
sd 6:0:1:0: [sdb] 585937500 512-byte logical blocks: (300 GB/279 GiB)
sd 6:0:2:0: [sdc] 585937500 512-byte logical blocks: (300 GB/279 GiB)
sd 6:0:3:0: [sdd] 585937500 512-byte logical blocks: (300 GB/279 GiB)
sd 6:0:1:0: [sdb] Write Protect is off
sd 6:0:1:0: [sdb] Mode Sense: cb 00 10 08
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: cb 00 10 08
sd 6:0:2:0: [sdc] Write Protect is off
sd 6:0:2:0: [sdc] Mode Sense: cb 00 10 08
sd 6:0:3:0: [sdd] Write Protect is off
sd 6:0:3:0: [sdd] Mode Sense: cb 00 10 08
sd 6:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 6:0:3:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 6:0:2:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
sdb:
sda: sdb1
sda1 sda2
sdd:
sdc: sdc1 sdc2 sdc3
sdd1 sdd2 sdd3
sd 6:0:1:0: [sdb] Attached SCSI disk
sd 6:0:0:0: [sda] Attached SCSI disk
sd 6:0:3:0: [sdd] Attached SCSI disk
sd 6:0:2:0: [sdc] Attached SCSI disk
dracut: Scanning devices sda2 for LVM logical volumes VolGroup/lv_swap VolGroup/lv_root
dracut: inactive '/dev/VolGroup/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/VolGroup/lv_home' [223.03 GiB] inherit
dracut: inactive '/dev/VolGroup/lv_swap' [5.88 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1427157142.933:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0 Jan 27 2015
EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:7f:03.0
EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:7f:03.0' (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
alloc irq_desc for 76 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: irq 76 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC262: SKU not ready 0x411111f0
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.137 (May 11, 2014)
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:02:00.0: setting latency timer to 64
tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95754) rev 5784100] (PCI Express) MAC address 00:1f:29:04:29:37
tg3 0000:02:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
tg3 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:01:00.0: setting latency timer to 64
tg3 0000:01:00.0: eth1: Tigon3 [partno(BCM95754) rev 5784100] (PCI Express) MAC address 00:1f:29:04:29:36
tg3 0000:01:00.0: eth1: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:01:00.0: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:01:00.0: eth1: dma_rwctrl[76180000] dma_mask[64-bit]
nvidia: module license 'NVIDIA' taints kernel.
NVRM: The NVIDIA Quadro FX 1800 GPU installed in this system is
NVRM: supported through the NVIDIA 340.xx Legacy drivers. Please
NVRM: visit for more
NVRM: information. The 346.47 NVIDIA driver will ignore
NVRM: this GPU. Continuing probe...
NVRM: No NVIDIA graphics adapter found!
NVRM: NVIDIA init module failed!
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
e1000e 0000:28:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
e1000e 0000:28:00.0: setting latency timer to 64
e1000e 0000:28:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
alloc irq_desc for 77 on node -1
alloc kstat_irqs on node -1
e1000e 0000:28:00.0: irq 77 for MSI/MSI-X
e1000e 0000:28:00.0: eth2: (PCI Express:2.5GT/s:Width x4) 00:26:55:e3:83:d6
e1000e 0000:28:00.0: eth2: Intel(R) PRO/1000 Network Connection
e1000e 0000:28:00.0: eth2: MAC: 0, PHY: 4, PBA No: D51930-007
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
e1000e 0000:28:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
e1000e 0000:28:00.1: setting latency timer to 64
e1000e 0000:28:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
alloc irq_desc for 78 on node -1
alloc kstat_irqs on node -1
e1000e 0000:28:00.1: irq 78 for MSI/MSI-X
e1000e 0000:28:00.1: eth3: (PCI Express:2.5GT/s:Width x4) 00:26:55:e3:83:d7
e1000e 0000:28:00.1: eth3: Intel(R) PRO/1000 Network Connection
e1000e 0000:28:00.1: eth3: MAC: 0, PHY: 4, PBA No: D51930-007
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:1:0: Attached scsi generic sg2 type 0
sd 6:0:2:0: Attached scsi generic sg3 type 0
sd 6:0:3:0: Attached scsi generic sg4 type 0
microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU4 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU5 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU6 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU7 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
Microcode Update Driver: v2.00 , Peter Oruba
udev: renamed network interface eth3 to rename5
udev: renamed network interface eth0 to rename2
udev: renamed network interface eth1 to rename3
udev: renamed network interface eth2 to rename4
udev: renamed network interface rename5 to eth1
udev: renamed network interface rename2 to eth2
udev: renamed network interface rename3 to eth3
udev: renamed network interface rename4 to eth0
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
microcode: CPU0 updated to revision 0x19, date = 2013-06-21
microcode: CPU1 updated to revision 0x19, date = 2013-06-21
microcode: CPU2 updated to revision 0x19, date = 2013-06-21
microcode: CPU3 updated to revision 0x19, date = 2013-06-21
microcode: CPU4 updated to revision 0x19, date = 2013-06-21
microcode: CPU5 updated to revision 0x19, date = 2013-06-21
microcode: CPU6 updated to revision 0x19, date = 2013-06-21
microcode: CPU7 updated to revision 0x19, date = 2013-06-21
kvm: disabled by bios
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
Adding 6160380k swap on /dev/mapper/VolGroup-lv_swap. Priority:-1 extents:1 across:6160380k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
e1000e 0000:28:00.0: irq 77 for MSI/MSI-X
e1000e 0000:28:00.0: irq 77 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:28:00.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
type=1305 audit(1427157155.680:3): audit_pid=2065 old=0 auid=4294967295 ses=4294967295 res=1
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
8021q: adding VLAN 0 to HW filter on device eth0
e1000e 0000:28:00.1: irq 78 for MSI/MSI-X
e1000e 0000:28:00.1: irq 78 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth1: link is not ready
8021q: adding VLAN 0 to HW filter on device eth1
alloc irq_desc for 79 on node -1
alloc kstat_irqs on node -1
tg3 0000:02:00.0: irq 79 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth2: link is not ready
alloc irq_desc for 80 on node -1
alloc kstat_irqs on node -1
tg3 0000:01:00.0: irq 80 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth3: link is not ready
mtrr: base(0xf9000000) is not aligned on a size(0xe00000) boundary
eth0: no IPv6 routers present
fuse init (API version 7.14)
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS (sdb1): Mounting Filesystem
XFS (sdb1): Starting recovery (logdev: internal)
XFS (sdb1): Ending recovery (logdev: internal)
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
usb 1-6: new high speed USB device number 2 using ehci_hcd
usb 1-6: New USB device found, idVendor=090c, idProduct=1000
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: USB Flash Disk
usb 1-6: Manufacturer: General
usb 1-6: SerialNumber: 0330120300079102
usb 1-6: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device scan complete
scsi 7:0:0:0: CD-ROM General USB Flash Disk 1100 PQ: 0 ANSI: 2
scsi 7:0:0:1: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 4
sr1: scsi3-mmc drive: 0x/0x caddy
sr 7:0:0:0: Attached scsi CD-ROM sr1
sr 7:0:0:0: Attached scsi generic sg5 type 5
sd 7:0:0:1: Attached scsi generic sg6 type 0
sd 7:0:0:1: [sde] 7830528 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 7:0:0:1: [sde] Write Protect is off
sd 7:0:0:1: [sde] Mode Sense: 43 00 00 00
sd 7:0:0:1: [sde] Assuming drive cache: write through
sd 7:0:0:1: [sde] Assuming drive cache: write through
sde: sde4
sd 7:0:0:1: [sde] Assuming drive cache: write through
sd 7:0:0:1: [sde] Attached SCSI removable disk
usb 1-6: USB disconnect, device number 2
usb 1-6: new high speed USB device number 3 using ehci_hcd
usb 1-6: New USB device found, idVendor=090c, idProduct=1000
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: USB Flash Disk
usb 1-6: Manufacturer: General
usb 1-6: SerialNumber: 0330120300079102
usb 1-6: configuration #1 chosen from 1 choice
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 8:0:0:0: CD-ROM General USB Flash Disk 1100 PQ: 0 ANSI: 2
scsi 8:0:0:1: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 4
sr1: scsi3-mmc drive: 0x/0x caddy
sr 8:0:0:0: Attached scsi CD-ROM sr1
sr 8:0:0:0: Attached scsi generic sg5 type 5
sd 8:0:0:1: Attached scsi generic sg6 type 0
sd 8:0:0:1: [sde] 7830528 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 8:0:0:1: [sde] Write Protect is off
sd 8:0:0:1: [sde] Mode Sense: 43 00 00 00
sd 8:0:0:1: [sde] Assuming drive cache: write through
sd 8:0:0:1: [sde] Assuming drive cache: write through
sde: sde4
sd 8:0:0:1: [sde] Assuming drive cache: write through
sd 8:0:0:1: [sde] Attached SCSI removable disk
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
usb 1-6: USB disconnect, device number 3